Candy washing machine not spinning

If your Candy washing machine does not spin, Coimbatore service specialists will help you quickly solve this problem. Possible causes may include engine malfunctions or blockages in the drainage system. Our technicians are highly qualified and use only original spare parts for repairs. We offer home visits in Coimbatore and outside the Coimbatore (up to 35 km), so you don’t have to worry about delivering your equipment to the service center. All work is performed with a 6-month warranty, which confirms our professionalism and reliability. Contact us, and your washing machine will work like new.

Reasons why the Candy washing machine does not spin

• Incorrect loading of laundry -The machine starts to vibrate more than usual and, to avoid damage to the internal components or the drum itself, automatically cancels the spin cycle.
• Problems with the pump - If the pump is clogged or damaged, the water will not be able to completely leave the drum, which will prevent the spin program from starting.
• Drive belt failure - If the belt is worn or torn, the drum will not be able to reach the required speed to effectively remove water from the laundry. In this case, the belt must be replaced with a new one.
• Problems with the electronic module - The board is responsible for controlling all functions of the machine and failures in its operation can lead to the fact that the command to start the spin cycle simply will not be executed. In such cases, diagnostics and repair of the electronic system by a specialist may be required.
• Filter clogging - If it gets clogged, it prevents the water from draining properly from the tank. Excess water prevents the spin cycle from starting for the same reason as problems with the pump - the machine protects itself from potential damage.
• Problems with water level sensor - The sensor may fail due to natural wear and tear, defects, or failure of other components of the equipment.

Methods for diagnosing and troubleshooting the problem

The water level sensor monitors the amount of liquid in the machine's tank. If it does not work properly or gives false signals about the presence of water in the tank even after it has been drained, the program may block the start of the spin mode.

• Checking the laundry load - The first step in diagnostics is to pay attention to the drum loading. If the machine is overloaded or the laundry is unevenly distributed, this may cause the spin cycle to fail.
• Cleaning the pump and filter - It is recommended to regularly check and clean these units of the washing machine. To do this, remove the filter according to the manufacturer's instructions, clean it under running water and check the pump for blockages.
• Inspection of the drive belt - Check the condition of the belt: if it is stretched, has cracks or other damage, it must be replaced with a new one.
• Checking the electronic module - Reboot the machine by unplugging it for a few minutes. This may help clear temporary control system errors.
• Testing the water level sensor - To diagnose this element, you need to check its operation with a multimeter or seek help from a professional to replace the faulty sensor.

When to see a specialist

The Candy washing machine, like any other household appliance, requires regular care and attention. However, there are times when the machine stops spinning the laundry, and this can become a real headache. In such situations, it is important to know when to contact a specialist.

• Complex technical faults - When it comes to complex technical problems, professional help is a must. Attempts to repair it yourself can lead to even more serious problems.
• Lack of experience and tools - If you don't have the tools or experience to repair it yourself, calling a professional will help prevent the problem from getting worse. Improper handling of the machine can cause additional damage or even complete inoperability of the device.
• Warranty service - If your car is still under warranty, then contacting specialists from an authorized service center is not only the right step, but also a must.

Washing machine maintenance and care

To avoid spin problems in the future, it is important to perform regular maintenance and care of your Candy washing machine.

• Regular cleaning of filters and pump - Clean the filters and pump periodically to avoid blockages and drainage problems. Dirt build-up can prevent normal spinning of laundry and cause unnecessary strain on the machine.
• Compliance with recommendations for loading laundry - Follow the manufacturer's instructions for maximum load capacity to avoid unbalance and overloading the machine.
• Periodic inspection and maintenance - Regularly check the condition of the drive belt and other mechanical parts for wear and damage. Early detection of such problems can prevent serious breakdowns in the future.
• Use of quality detergents - Use only detergents recommended by the manufacturer to avoid deposits and damage to machine parts.